impact polystyrene

英 [ˈɪmpækt ˌpɒliˈstaɪriːn] 美 [ˈɪmpækt ˌpɑːliˈstaɪriːn]

网络  抗冲聚苯乙烯

化学

双语例句

  1. The under board of dimple drainage plant is makes by high impact polystyrene ( HIPS).
    钉子型排水板的底板是用抗高冲击及高抗压聚苯乙烯（HIPS）制成。
  2. The advances on the fracture toughness in high impact polystyrene ( HIPS) were reviewed.
    综述了高抗冲聚苯乙烯断裂韧性方面研究工作的进展。
  3. Here Inducing briefly the production process of high impact polystyrene resin, analyzing the effect factors of falling dart and expounding the available steps to stabilize the falling dart.
    本文简要介绍高抗冲型聚苯乙烯（HIPS）的生产工艺，分析影响HIPS落锤冲击强度的因素，提出了提高并稳定落锤冲击强度的有效措施。
  4. Surface modification of aluminum trihydroxide and its application in high impact polystyrene
    氢氧化铝表面改性及在高抗冲聚苯乙烯中的应用
  5. New Progress of Research on Blending Modification of High Impact Polystyrene
    高抗冲聚苯乙烯共混改性研究新进展
  6. Recycling Technology of High Impact Polystyrene Waste by Reinforced Modifications
    高抗冲聚苯乙烯废旧料高强改性再生技术
  7. Factors affecting mechanical properties of high impact polystyrene
    影响高抗冲聚苯乙烯力学性能的因素
  8. Effects of extrusion temperature and screw revolution speed on apparent density, cell structure and tensile strength of low-expanding high impact polystyrene ( HIPS) are studied by design of experiments.
    利用试验设计方法研究了HIPS低发泡过程中，挤出温度及螺杆转速对发泡制品的表现密度、泡孔尺寸、泡孔尺寸均匀度以及制品强度的影响。
  9. The Morphology and Property of High Impact Polystyrene
    高抗冲聚苯乙烯的形态与性能
  10. Research Progress in Rubbers Special for High Impact Polystyrene
    高抗冲聚苯乙烯专用橡胶的研究进展
  11. Research on flow properties of high impact polystyrene melts in extrusion
    高抗冲聚苯乙烯熔体挤出流动特性的研究
  12. Production of high impact polystyrene using br 9002
    用BR9002生产高抗冲聚苯乙烯
  13. High impact polystyrene ( HIPS) with antibacterial activity was prepared by means of mechanically blending and thermal-initiated bulk polymerization, and their antibacterial activities were measured and analyzed via quantitative and qualitative tests.
    采用机械共混法和热本体聚合法制备抗菌型高抗冲PS（HIPS），通过定性和定量试验对抗菌型HIPS的抗菌活性进行了测定与分析。
  14. Industrial test of transparent high impact polystyrene resin
    透明高抗冲聚苯乙烯树脂的工业化试验
  15. Study of effect of epoxy resin on flame retardancy in high impact polystyrene with micro-capsulated red phosphorus
    环氧树脂/微胶囊红磷体系对高抗冲聚苯乙烯阻燃性能的研究
  16. The flow behavior of two high impact polystyrene ( HIPS) melts in extrusion were investigated in both low and high ranges of shear rates by using a capillary rheometry.
    应用毛细管流变仪，分别在低和高的剪切速率范围内考察了两种高抗冲聚苯乙烯熔体的挤出流动行为。
  17. Morphology of the nanometer dispersive phase in high transparency impact polystyrene ( HT-IPS) and its influence on mechanical properties of the material were studied.
    研究了高透明抗冲聚苯乙烯（HT-IPS）中纳米分散相形态及其对材料力学性能的影响。
  18. The free volume properties of high impact polystyrene ( HIPS)-low density polyethylene ( LDPE) blend have been investigated by means of positron annihilation lifetime spectra ( PALS).
    不同组成的高冲聚苯乙烯（HIPS）和低密度聚乙烯（LDPE）共混物的正电子湮没寿命谱被测量，结果表明HIPS和LDPE是不相溶共混物。
  19. Under the condition of factual manufacture, the effect of vibration frequency ( from o to 12 HZ) and amplitude ( from 0 to 0.30 mm) on the mechanical properties and the impact section morphology structures of polystyrene ( PS) product were investigated.
    在实际生产条件下，在振频0~12Hz、振幅0~0.30mm范围内研究了振动参数对聚苯乙烯（PS）制品的力学性能和冲击断面形态结构的影响。
  20. Analysis on factors affecting impact strength of bulk polystyrene resin
    本体聚苯乙烯树脂冲击强度影响因素分析
  21. A study on synthesis of high transparency impact polystyrene ( HT-IPS) was carried out in a continuous bulk polystyrene pilot plant.
    在连续本体聚苯乙烯中试装置上对高透明抗冲聚苯乙烯树脂进行了研究。
  22. The rheological behaviors of polystyrene/ styrene ( PS/ St), high impact polystyrene/ styrene ( HIPS/ St) and polydimethyl siloxanes ( PDMS)/ cydohexane solutions were measured by HAAKE type rheometer D100/ 300 system.
    利用HAAKE流变仪的D100/300测量系统，对聚苯乙烯/苯乙烯（PS/St）、高抗冲聚苯乙烯/苯乙烯（HIPS/St）及甲基硅油/环已烷等体系的流变行为进行了测定。
  23. Rheological Behavior of the Two-phase in the High Impact Polystyrene Prepolymer
    高抗冲聚苯乙烯预聚体中两相的流变特性
  24. Poly ( butadiene styrene)/ poly ( ethyl methacrylate) graft copolymers ( SBR g PEMA) were synthesized by seeded emulsion polymerization and blended with high impact polystyrene ( HIPS).
    采用种子乳液聚合法合成了丁苯橡胶接枝聚甲基丙烯酸乙酯共聚物（SBR－g－PEMA）。
  25. Effects of Micro-Capsulated Red Phosphorus and Novolac Resin on Inflaming Retarding of High Impact Polystyrene
    微胶囊红磷和酚醛环氧树脂对高抗冲聚苯乙烯阻燃性能的影响
  26. Study and Preparation of Flame Retardent High Impact polystyrene Plastics
    阻燃性高抗冲聚苯乙烯塑料的研究
  27. Fractures toughness in high impact polystyrene
    高抗冲聚苯乙烯的断裂韧性
  28. It studied the influencing effects of triphenylphosphate ( TPP) and Novolac on flame retardancy of high impact polystyrene ( HIPS) by use of a cone calorimeter, limiting oxygen index ( LOI) and vertical combustion test.
    采用锥形量热仪、极限氧指数法和垂直燃烧法研究了可溶可熔酚醛树脂（Novolac）和磷酸三苯酯（TPP）对高抗冲聚苯乙烯（HIPS）阻燃性能的影响。
  29. Synthesis and Study of High Transparency Impact Polystyrene I. Structure and Properties
    高透明抗冲击聚苯乙烯树脂的研制Ⅰ.结构与性能
点击展开全文

考试分类

行业分类

柯林斯词典词频分级词汇

其他分类